Rule 2000 GPH High-Capacity Bilge Pump & Rule-A-Matic Float Switch Bundle

Rule 2000 GPH High-Capacity Bilge Pump & SuperSwitch Installation Bundle

Product Overview

The Rule 2000 GPH is the industry standard for high-volume primary bilge pumping and emergency dewatering. This professional-grade bundle pairs the heavy-duty 2000 GPH motor with the legendary Rule SuperSwitch, widely considered the most reliable float switch in the marine industry. Designed for larger vessels and critical peace of mind, this kit provides massive pumping power for the toughest marine environments.

Key Features

• Massive Pumping Power: Moves 2000 gallons per hour (33 gallons per minute), capable of handling serious water ingress or emergency flooding.

• The "SuperSwitch" Advantage: Includes the Rule 37A SuperSwitch, featuring a larger float for increased buoyancy, a 5-year warranty, and a snap-in base for effortless cleaning.

• Industrial Build Quality: Engineered to commercial standards with an oversized motor, moisture-tight seals, and a stainless steel shaft for maximum lifespan.

• Snap-Lock Strainer: The base acts as a quick-release strainer, allowing you to clear debris from the impeller without removing any mounting screws.

• Ignition Protected: Certified to meet USCG and ISO standards for safe use in gasoline engine compartments.

What’s in the Box?

1. Rule 2000 GPH Manual Bilge Pump: (12V DC, High-Capacity Series).

2. Rule SuperSwitch Float Switch: (Model 37A, Heavy-duty 20-amp rated).

3. 10' Bilge Hose: 1-1/8" (29mm) Diameter, heavy-duty corrugated design.

4. Thru-Hull Fitting: 1-1/8" High-impact marine plastic.

5. 2x Hose Clamps: Size 16 316 Stainless Steel for a permanent, rust-proof seal.

Technical Specifications

• Flow Rate: 2000 GPH (7570 LPH)

• Hose Size: 1-1/8" (29mm)

• Voltage: 12V DC

• Amp Draw: 8.4A @ 12V (12.0A @ 13.6V)

• Fuse Size: 15 Amp

• Wire Size: 14 AWG (Use 12 AWG if the run from the battery is over 20 feet).